Techna
/
Electrical Products
/
Terminals & Distribution Blocks
/
Spring Clamp Terminals
/
Disconnect & Test Spring Clamp Terminals

Disconnect & Test Spring Clamp Terminals

The Ttec CXK Series are compact Disconnect and Test Spring Clamp Terminal Blocks. In these terminals disconnection is achieved by opening the insulated knife (blade) contact in the middle of the terminal.

Separate testing points are provided on top for inserting standard Ø 2.3 mm test probes.

Alternate and continuous bridging can be done with standard insulated push in jumpers.

Multi connect 3 wire and 4 wire terminals eliminate reliability problems encountered when there is a need to connect multiple wires in a single Terminal Block.

Available in the following versions:

0.2 mm² to 2.5 mm² - Ttec CXK2.5

CXK2.5 Conductor Cross Section Stranded min: 0.2 mm²
Conductor Cross Section Stranded max: 2.5 mm²
Rated Voltage: 1000 V
Rated Current: 20 A
Width (Thickness): 5 mm
Length: 62.2 mm
Height with 35 x 7.5 mm DIN-Rail: 42.3 mm

0.2 mm² to 2.5 mm² (2 Inputs - 2 Outputs) - Ttec CXK2.5/4

CXK2.5/4 Conductor Cross Section Stranded min: 0.2 mm²
Conductor Cross Section Stranded max: 2.5 mm²
Rated Voltage: 1000 V
Rated Current: 20 A
Width (Thickness): 5 mm
Length: 74.7 mm
Height with 35 x 7.5 mm DIN-Rail: 42.3 mm

0.2 mm² to 4 mm²- Ttec CXK4

CXK4 Conductor Cross Section Stranded min: 0.2 mm²
Conductor Cross Section Stranded max: 4 mm²
Rated Voltage: 1000 V
Rated Current: 28 A
Width (Thickness): 6 mm
Length: 70.5 mm
Height with 35 x 7.5 mm DIN-Rail: 42.6 mm

0.2 mm² to 4 mm² (1 Input - 2 Outputs) - Ttec CXK4/3

CXK4/3 Conductor Cross Section Stranded min: 0.2 mm²
Conductor Cross Section Stranded max: 4 mm²
Rated Voltage: 1000 V
Rated Current: 28 A
Width (Thickness): 6 mm
Length: 86.2 mm
Height with 35 x 7.5 mm DIN-Rail: 42.6 mm