A+ A A-

Power Terminal Blocks

Power Terminal Blocks
zoom Zoom image

Power terminal blocks are preferred for applications using wires of large cross section. The wire is crimped to a ring/fork lug and is screwed on to the flat current bar of the terminal block. Specially designed mounting feet holds the terminal block rigidly on to the mounting rail. Two lugs of the rated cross section can be connected to the terminal block, without sacrificing the safety of the terminal block. The hinged protective cover makes the terminal block shock proof (finger safe) and has marker recess to accept marking tag.

 

Available in the following versions:

 

M6 Nut - TtecPTB35/50SH

ptb35-50shConductor Cross Section Stranded min: 1.5 mm²
Conductor Cross Section Stranded max: 50.0 mm²
Rated Voltage: 2000 V
Rated Current: 150 A
Width (Thickness): 25 mm
Length: 169 mm
Height with DIN 35 x 7.5 mm rail: 66.5 mm

M8 Nut - TtecPTB70/95SH

ptb70-95shConductor Cross Section Stranded min: 1.5 mm²
Conductor Cross Section Stranded max: 95 mm²
Rated Voltage: 2000 V
Rated Current: 232 A
Width (Thickness): 32 mm
Length: 192.0 mm
Height with DIN 35 x 7.5 mm rail: 78.0 mm

Tel: +44 (0) 1923 222 227
Fax: +44 (0) 1923 219 700
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Copyright © 2017 Techna International Ltd. All Rights Reserved • Terms of Use

By using our website, you agree to our use of cookies • More Info